Chapter 5 — Network Support
124 CK61 Mobile Computer with Windows Mobile User’s Manual
To configure Bluetooth using the Intermec Settings applet
Connecting with Bluetooth
Make sure Bluetooth is enabled on your mobile phone. For example, with
the Nokia 3650, go to its menu, select Connect > Bluetooth, then set My
phone’s visibility to “Shown to all.”
Before you connect to the network, make sure Bluetooth is enabled on your
CK61 so you can find and connect to remote devices. Go to “About
Bluetooth” on page 114 for information.
To establish a Bluetooth connection between your CK61 and your mobile phone
3
1 Select Start > Settings > the System tab > the Intermec Settings icon.
2 Tap (+) to expand Communications.
3 Tap (+) to expand Bluetooth to configure its settings.
Note: While these instructions apply to many Bluetooth devices, these
instructions use the Nokia 3650 for example purposes.
1 Tap Start > Settings > the Connections tab > the Connections icon.
2 Tap Add a new modem connection.
To Next Page
Loading...
