Intermec CK61 - Intermec Settings; Supported Devices

Chapter 1 — Using the Computer
12 CK61 Mobile Computer with Windows Mobile User’s Manual
Following are the minimum reading distances for CK61s using the 2D and
near-far range area imagers. When correctly mounted, an exit window
reduces reading distances by about 4%.
Near-Far Range Area Imager with 0.350 in (0.889 cm) Setback
Intermec Settings
Use Intermec Settings to configure these imager commands. For help using
Intermec Settings, see “Using the Intermec Settings Applet” on page 17.
For information on the commands and their parameters, see the Intermec
Computer Command Reference Manual (P/N 073529), available from the
Intermec web site at www.intermec.com.
Supported Devices
The CK61 should connect the following scanner models:
• 1551
• 1553
• 1555
• ScanPlus 1800SR
• 1800ST
• 1800VT
• Scan Image 1470
•SF51
2D Area Imager Reading Distances with 0.04" Setbacks
Symbology Density Near Distance Far Distance
MaxiCode 35 mil 4.98 cm/ 1.96" 33.92 cm/ 12.96"
Data Matrix 15 mil 9.30 cm/ 3.66" 16.41 cm/ 6.46"
PDF417 10 mil
8 mil
6.6 mil
7.77 cm/ 3.06"
8.28 cm/ 3.26"
11.33 cm/ 4.46"
22.76 cm/ 8.96"
20.22 cm/ 7.96"
15.77 cm/ 6.21"
Code 39 15 mil
10 mil
8 mil
5.23 cm/ 2.06"
8.03 cm/ 3.26"
11.33 cm/ 4.46"
29.87 cm/ 11.76"
23.27 cm/ 9.16"
19.20 cm/ 7.56"
UPC 13 mil 6.25 cm/ 2.46" 31.65 cm/ 12.46"
Symbology Density Near Distance Far Distance
Code 39 0.10 mm (3.8 mil)
0.25 mm (10 mil)
0.5 mm (20 mil)
1 mm (40 mil)
1.3 mm (51 mil)
2.54 mm (100 mil)
18.889 cm (7.437 in)
18.889 cm (7.437 in)
19.889 cm (7.830 in)
40.889 cm (16.098 in)
100.889 cm (39.720 in)
130.889 cm (51.531 in)
31.111 cm (12.248 in)
68.111 cm (26.815 in)
109.111 cm (42.957 in)
219.111 cm (86.264 in)
309.111 cm (121.697 in)
429.111 cm (168.941 in)
EAN 100% 0.33 mm (13 mil) 22.889 cm (9.011 in) 99.111 cm (39.020 in)