Intermec CK61 - Setting the Vibrate Mode; Setting the CK61 to Vibrate Using the Volume Control; Using the Status Lights

Chapter 1 — Using the Computer
24 CK61 Mobile Computer with Windows Mobile User’s Manual
5 Select File > Exit to close the applet.
Using the Status Lights
The status lights on the CK61 turn on to indicate the battery status or a
successful bar code decode. The battery lights and screen icon work to alert
you to your battery status. If the battery light (to the right of the Scan
button) comes on, check the status bar to see what icon appears. The
battery may be critically low and need replacing. The Good Read light
(green) above the display indicates a successfully decoded bar code.
Setting the Vibrate Mode
When you want to set the CK61 to vibrate, you can use any of these
methods: using the Volume applet from the Start screen, using the Intermec
Settings applet, or using the Sounds & Notifications applet.
Setting the CK61 to Vibrate Using the Volume Control
The Volume Control icon is seen in the toolbar at the top of the screen.
To set your CK61 to vibrate
1 Tap the Volume icon at the top of the screen.
2 Select Vibrate.
3 Tap anywhere onscreen to clear the control from your display.