Chapter 5 — Network Support
114 CK61 Mobile Computer with Windows Mobile User’s Manual
About Bluetooth
“Bluetooth” is the name given to a technology standard using short-range
radio links, intended to replace cables connecting portable and fixed
electronic devices. The standard defines a uniform structure for a range of
devices to communicate with each other with minimal user effort. Its key
features are robustness, low complexity, low power, and low cost. The
technology offers wireless access to LANs, the mobile phone network, and
the internet for a host of home appliances and mobile computer interfaces.
Wireless Printing can also be done with Microsoft APIs, including
Bluetooth extensions for Winsock, and Bluetooth virtual COM ports.
Information about other Bluetooth software is in the Bluetooth Resource
Kit and the Bluetooth Resource Kit User's Guide in the Intermec Developer
Library (IDL), which is available at www.intermec.com/idl. S
About the Application
• If Bluetooth is enabled, and either a warm boot or a cold boot was
performed, the CK61 boots up with the Bluetooth state enabled and
Bluetooth virtual COM ports (such as printing) registered. Reactivate
the connections manually as the system does not do them.
• If Bluetooth is disabled, and either a warm boot or a cold boot was
performed, the CK61 boots up with Bluetooth disabled.
To turn on Bluetooth
1 Select Start > Settings > the Connections tab > the Bluetooth icon >
the Mode tab.
2 Check Turn on Bluetooth.
3 Check Make this device discoverable to other devices.
Bluetooth is not started by default after a cold boot is performed.
To run Bluetooth
•Tap Start > Settings > the Connections tab > the Bluetooth icon. The
CK61 retains the Bluetooth state when either warm boots or cold boots
are performed, for example:
To Next Page
Loading...
