Intermec CK61 - Setting the Vibrate Mode Using Intermec Settings; Setting the Vibrate Mode Using Sounds & Notifications

Chapter 1 — Using the Computer
CK61 Mobile Computer with Windows Mobile User’s Manual 25
Setting the Vibrate Mode Using Intermec Settings
You can also set the Vibrate mode using the Intermec Settings applet.
To set your CK61 to vibrate
Setting the Vibrate Mode Using Sounds & Notifications
The Sounds & Notifications applet is another place where you can set the
vibrate mode.
1 Tap Start > Settings > the System tab > the Intermec Settings icon.
2 Tap (+) to expand Device Settings > Good Read > any of the Scanner
options > Beep or Vibrate, then tap Vibrate.
3 To disable the vibrate, tap any of the other Beep options.
4 Select File > Save Settings to save your changes.
5 Select File > Exit to close the applet.