Chapter 1 — Using the CV30 Fixed Mount Computer
12 CV30 Fixed Mount Computer With Windows CE User’s Manual
The Ready-to-Work indicator has three states: off, blinking, and
on. Use this table to understand the different states of the light.
Installing an External Antenna
You can purchase a 2.4 GHz “patch” antenna to mount on a wall,
fork lift, or other flat surface using either screws or small patches
of adhesive-backed hook and loop fastener material. For more
information on ordering an antenna, see “Accessories for the
CV30” on page 94.
Since system performance and antenna polarization are site-
dependent, a permanent mounting location and orientation may
require some experimentation. In most fixed installations, you
should mount the antenna initially in a vertically-polarized
position, with the cable from the antenna parallel to the floor/
ceiling.
Ready-to-Work Light States
Light State What It Means
Off The TE 2000 application has not loaded
successfully, or you are not running a Ready-to-
Work application.
Blinking The CV30 is not connected to the host.
On A connection to the server has been established and
all network connections are active.
To Next Page
Loading...
Need help?
General
