Chapter 3 — Configuring the CV30
28 CV30 Fixed Mount Computer With Windows CE User’s Manual
Configuring the CV30 Operating Parameters
You can configure many operating parameters on the CV30, such
as the symbologies it decodes or the network settings it uses. The
CV30 provides a configuration application called Intermec
Settings that allows you to set all of the operating parameters in
one place.
Configuring the CV30 Using Intermec Settings
Use Intermec Settings to configure the CV30 and to view system
information. You access Intermec Settings from the Control
Panel.
To open Intermec Settings
•Tap Start > Settings >Control Panel > Intermec Settings.
For detailed information on the commands available in Intermec
Settings, see the Intermec Computer Command Reference Manual
(P/N 073529). The Intermec Computer Command Reference
Manual is available from the Intermec web site.
To Next Page
Loading...
