Chapter 3 — Configuring the CV30
30 CV30 Fixed Mount Computer With Windows CE User’s Manual
3 If required for your network, you may also need to set these
parameters on each CV30:
• Primary and secondary DNS servers
• Primary and secondary WINS servers
4 Make sure your CV30 is talking to the network and that the
network can see your CV30.
Setting Up Bluetooth Communications
You can send information to a Bluetooth device wirelessly using
the standard Bluetooth radio in the CV30. The Bluetooth
technology uses short-range radio links and allows for
communications over a 10-meter (32.8 foot) range.
You can use the Bluetooth radio to connect to these wireless
devices:
• Scanners
•Printers
• Headsets
To turn the Bluetooth radio on
1 Select Start > Settings > Control Panel > Intermec Settings.
2 Go to Communications > Bluetooth > Power.
3 Tap On. Intermec Settings prompts you to save settings.
4 Tap Yes.
5 Exit Intermec Settings.
Once Bluetooth is enabled, it stays enabled through a warm or
cold boot and maintains virtual COM ports (such as printing)
registration. However, you must reactivate connections because
these are not done automatically.
For more information on Bluetooth software, see the Bluetooth
Resource Kit and the Wireless Printing Development Guide in the
Intermec Developer Library (IDL). You can download this
resource kit from the Intermec Developer Library web site at
www.intermec.com/idl.
To Next Page
Loading...
Need help?
General
