Chapter 5 — Troubleshooting and Maintaining the CV30
CV30 Fixed Mount Computer With Windows CE User’s Manual 87
Upgrading the CV30 Using an SD Card
To upgrade the operating system or SSPB, you need:
•an SD card.
• an SD card reader (optional).
You will need to set the network communications parameters on
the CV30 to reestablish communications with the other devices
in the wireless network.
To upgrade the operating system
1 Back up all of your applications and data.
2 Download the latest upgrade (.exe) file from the Intermec
web site to your desktop PC.
3 Double-click the .exe file on your desktop PC. An installation
wizard starts and walks you through the process of extracting
the upgrade files. The installation wizard extracts the upgrade
files to:
C:\Program Files\Intermec\<version>
Copy all files in this directory to the SD card. Do not copy
the .exe file to the SD card.
4 If you are using an SD card reader, remove the SD card from
the CV30 and place it in the reader.
5 Copy the contents of the <version> folder to the SD card.
6 If you are using an SD card reader, insert the SD card into the
CV30.
7 Perform a clean boot on the CV30. For help, see
“Troubleshooting the Boot Process (Clean Booting)” on
page 89.
Note: If you are using an SD card reader to copy files to your SD
card, see “Increasing Memory Storage” on page 16 for
information on how to remove and insert the SD card.
Note: Make sure the CV30 has completely loaded all of the
upgrade files before you remove the SD card or reset the
computer.
To Next Page
Loading...
Need help?
General
