Intermec CV30 User Manual

Chapter 3 — Configuring the CV30
62 CV30 Fixed Mount Computer With Windows CE User’s Manual
b Set Data Encryption to either WEP or TKIP.
Follow these steps to enable WPA authentication using a
preshared key:
a Set Authentication to WPA-PSK.
b Set Data Encryption to either WEP or TKIP.
c Enter the new Network key.
5 From the EAP type list, select either MD5-Challenge, PEAP
or TLS.
6 Tap OK to close the screen.
Loading a Certificate
If you choose to use transport layer security (TLS) with WPA or
802.1x security, you need to have a unique client certificate on
the CV30 and a trusted root certificate authority (CA) certificate.
You can use a third-party CA to issue unique client certificates
and a root certificate.
There are three ways to load certificates on the CV30:
• If you are using Active Directory to issue certificates, you can
use the Enroll Certificates application to load the certificates.
• If you are using another third-party CA, you can use the
Import Certificates application to load the certificates.
• If you have multiple certificates to install, you can use the
Import Root Certificates and Import User Certificates
functions.
Note: If you select to automatically connect to non-preferred
networks, the CV30 detects any new networks and provides you
with the opportunity to configure them.
Note: For certificates to be valid, the CV30 must be set to the
correct date and time. After cold booting the CV30, you may
need to correct the date and time.

Intermec CV30 Specifications

General

Brand	Intermec
Model	CV30
Category	Desktop
Language	English