Chapter 5 — Troubleshooting and Maintaining the CV30
CV30 Fixed Mount Computer With Windows CE User’s Manual 91
Cleaning the Screen
To keep the CV30 in good working order, you may need to clean
the screen whenever necessary depending on the environment in
which you use the computer. To clean the CV30, use a solution
of ammonia and water.
To clean the screen
1 Disconnect the CV30 from the power supply.
2 Dip a clean towel or rag in the ammonia solution and wring
out the excess. Wipe off the screen. Do not allow any abrasive
material to touch these surfaces.
3 Wipe dry.
To Next Page
Loading...
