Chapter 3 — Configuring the CV30
32 CV30 Fixed Mount Computer With Windows CE User’s Manual
If you do not want to allow incoming connections, make sure
both parameters are disabled.
4 Save your changes and exit Intermec Settings.
To connect to the wireless scanner using the association label
1 Using your wireless scanner, scan the Bluetooth association
label on the side of the CV30.
2 The CV30 prompts you to enter the passcode for your
scanner. The default passcode for Intermec Bluetooth
scanners is
0000.
3 Tap Finish.
To connect to the wireless scanner using the Bluetooth Scanner Wizard
1 Select Start > Programs > Windows Explorer > Program
Files > Intermec > Network > Bluetooth.
4 Select how you would like to set your scanner (the default is
Search) and then tap Next. The CV30 starts discovering
scanners.
5 Select the scanner you want to connect to from the Devices
list and then tap Next.
2 Double-tap the BluetoothScannerWizard icon. The
Bluetooth Scanner Wizard appears.
3 Tap Add Device. The wizard advances to the next screen.
To Next Page
Loading...
