Chapter 3 — Configuring the CV30
CV30 Fixed Mount Computer With Windows CE User’s Manual 45
7 Save your settings.
Configuring WPA Security With Funk Security
Use these procedures to set WPA-802.1x, WPA2-802.1x, WPA-
PSK, or WPA2-PSK security on your CV30 with Funk security.
To configure WPA-802.1x or WPA2-802.1x with Funk security
1 Open Intermec Settings.
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
3 Choose Communications > 802.11 Radio > Funk Security
> Profile.
4 For Association, choose WPA or WPA2 and press Enter.
Encryption automatically defaults to TKIP if you are using
WPA. Encryption automatically defaults to AES if you are
using WPA2.
5 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS and
press Enter.
If you choose TTLS or PEAP:
To Next Page
Loading...
