Chapter 3 — Configuring the CV30
52 CV30 Fixed Mount Computer With Windows CE User’s Manual
4 For Pre-Shared Key field, enter the passphrase as ASCII. The
passphrase must be 8 to 63 characters and match the
passphrase on the access point.
5 Tap OK.
Configuring WPA2-PSK Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose None.
3 For Association, choose WPA2.
4 For Encryption, choose TKIP or AES.
5 For Pre-Shared Key field, enter the passphrase as ASCII. The
passphrase must be 8 to 63 characters and match the
passphrase on the access point.
6 Tap OK.
Configuring PEAP Security With Profile Wizard
Protected EAP (PEAP) performs secure authentication against
Windows domains and directory services. It is comparable to
EAP-TTLS, though not as flexible.
To configure PEAP security
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose PEAP.
To Next Page
Loading...
