Intermec EasyCoder F2 – Installation & Operation Ed. 2 71
Chapter 9
2
1
4
3
b
w
f
w
Options
Introduction
The EasyCoder F2 is designed to provide a high degree of fl exibility
by means of a modular design. By adding a collection of optional
devices to the basic concept, the printer can be adapted for a variety
of applications. Most options can easily be installed by the operator
whereas some options should be installed by an authorized service
technician, or are only available as factory-installed options.
Below is a description of some of the many options available
for EasyCoder F2.
Label-Taken Sensor
Rewinder &
Guide Shaft
3" Adapter
Quick-Load Guides
(included)
Short Side Door
Paper Supply Hanger
1.5" Paper Spool
Long Side Door
Interface Board
(various types)
To Next Page
Loading...
Need help?
General
