Intermec EasyCoder F2 – Installation & Operation Ed. 2 7
Intermec EasyCoder F2 – Installation & Operation Ed. 1 7
Chapter 1
Introduction
The EasyCoder F2 is a sturdy medium-duty direct thermal printer
with a printhead resolution of 8 dots/mm (203.2 dpi) and a maximum
print width of 56 mm (2.2 inches). It offers a large number of
useful facilities, such as....
• Flash memory SIMMs for fi rmware, fonts, bar codes and
application programs
• Built-in memory card adapter
• Built-in USB and RS 232C interfaces
• Provision for one extra interface board
• Bar code wand interface for easy setup
• Keyboard and display with backlight for improved user
interface.
The EasyCoder F2 supports the unique and flexible Intermec
Fingerprint 7.31 programming language, which allows the user to
create custom-made application programs and label layouts in a
Basic-like environment. It is also designed to work with the printer
drivers for various versions of Microsoft Windows or with the
Intermec Direct Protocol programming language. The Windows
drivers allows you to design labels using standard PC applications,
e.g. Microsoft Offi ce.
The EasyCoder F2 supports 15 scalable Unicode TrueType and
TrueDoc fonts as standard. Additional fonts can be downloaded
into the printer’s Flash memory, or be plugged in using a memory
card. The Unicode standard allows the use of special characters
for various languages including non-Latin fonts, such as Cyrillic,
Chinese, Japanese, Korean, Hebrew etc.
To Next Page
Loading...
Need help?
General
