Intermec EasyCoder F2 – Installation & Operation Ed. 280
Chapter 11 Maintenance
Printhead
Replacement
The printhead is subject to wear both from the thermal paper and
from the rapid heating and cooling process during printing. Thus,
the printhead will require periodical replacement.
Time between printhead replacements depends on the print images,
the type of paper in use, the amount of energy to the printhead,
and several other factors.
Note!
While replacing the printhead, the power should be switched
off.
Open the side door.
Turn the printhead lift knob clockwise to lift
the printhead.
1 2
To Next Page
Loading...
Need help?
General
