Appendix A — Specifications
PD41 and PD42 Commercial Printer User’s Manual 99
• ESim: CONTINUOUS
Non-Adhesive Strip
Self-Adhesive Strip
Liner (b)
The liner must not extend more than a total of 1.6 mm (0.06 in)
outside the face material and should protrude equally on both sides.
Media Width Including Liner (a)
Measurement Value
Maximum 118 mm (4.65 in)
Minimum 25.0 mm (1.00 in)
Media Width Excluding Liner (c)
Measurement Value
Maximum 116.4 mm (4.58 in)
Minimum 23.8 mm (0.94 in)
NON-ADHESIVE
STRIP
a
To Next Page
Loading...
