Chapter 1 — Using the Printer
20 PD41 and PD42 Commercial Printer User’s Manual
The printer prints several test labels containing hardware, setup,
and network information and then enters Dump mode.
7 Press the Print button once or press the cancel soft key ( ) to
exit Dump mode.
Creating and Printing Labels
The easiest way to create and print labels, is to use the label design
software LabelShop®. You can download LabelShop from the
PrinterCompanion CD that shipped with your printer or you can
download it from the Downloads page for your printer on
www.intermec.com.
You can also use Fingerprint and IPL to create and print labels. For
more information, see either the Intermec Fingerprint Command
Reference Manual or the IPL Command Reference Manual.
To Next Page
Loading...
