Intermec PD41

Chapter 3 — Configuring the Printer
42 PD41 and PD42 Commercial Printer User’s Manual
The Main Nodes of the Setup Menu in ESim
Configuring the Printer From the Home Page
If you are using an Ethernet or 802.11 wireless connection, you can
change configuration settings from the home page of the printer.
To access the home page of the printer
1 Start your web browser.
2 In the address field, type the IP address of your printer and press
Enter. The home page of your printer appears.
The home page displays the assigned name, firmware version,
Active Command Set, MAC address, and IP address of your
printer. The home page also displays the contents of the image
buffer, as well as the status of the Ready-to-Work indicator.
3 Click Configuration.
SETUP:
SERIAL-COM
SETUP:
DATE TIME
SETUP:
MEDIA
SETUP:
FEEDADJ
Starting point
SETUP:
COM
SETUP:
PRINT DEFS
SETUP:
NET-COM, NET1
SETUP:
NETWORK
SETUP:
CHARSET
Note: You should have already connected your printer to your
network and obtained an IP address. If not, see “Connecting the
Printer to Your Network” on page 24.