Intermec PD41

Chapter 1 — Using the Printer
PD41 and PD42 Commercial Printer User’s Manual 5
PD42 Startup Screen: This screen appears the first time you turn on the
PD42.
Once your printer is running a particular printer language, you can
change the printer language from the Setup menu.
To change the printer command language from the PD42 Setup menu
1 Press the Setup ( ) button.
2 Press until you see PRINT DEFS and then press .
3 Press until you see CMD LANGUAGE and then press .
4 Press until you reach the command language you want to use,
and then press .
5 Press ( ) to exit the Setup menu.
You can also use the printer home page or PrintSet to choose a printer
command language. For help, see “Configuring the Printer From
the Home Page” on page 42 or “Configuring the Printer Using
PrintSet” on page 56.
Understanding the Front Panel
The PD41 control panel consists of one button and four LEDs. The
PD42 control panel consists of one button, four LEDs, a screen, and
five soft keys. Use the next two sections to understand how to use the
front panel on each printer.
Choose command
language
FP IPL ZSIM
DSIM ESIM