Chapter 2 — Connecting the Printer
PD41 and PD42 Commercial Printer User’s Manual 25
Entering the IP address brings up the home page of the printer,
where you can check and modify printer settings.
5 You will be prompted to enter a login name and a password. By
default, the login name is admin and the password is pass.
For more information on using the web page to configure the
printer, see “Configuring the Printer From the Home Page” on
page 42.
If your network does not assign IP numbers automatically, or the
Ready-to-Work indicator is flashing to indicate a network error, you
can use PrintSet (available on the PrinterCompanion CD or as a
download from www.intermec.com) to correct the network settings.
Manually Configuring IP Settings
You can configure the IP settings of your printer by sending
Fingerprint or IPL commands through a serial connection. After you
configure the IP settings, you can disconnect the printer from your PC
and communicate with the printer using 802.11 communications.
To Next Page
Loading...
