Chapter 1 — Using the Printer
16 PD41 and PD42 Commercial Printer User’s Manual
7 Reattach the front cover and secure with the thumbscrew.
8 Push in on the lower part of the label taken sensor and bring it out
to a fully horizontal position.
9 Close the media cover.
10 Press the Print button to advance the media.
Loading Thermal Transfer Ribbon
Thermal transfer printing gives you a durable printout that is less
vulnerable to chemicals, heat, sunlight and so on than direct thermal
printing. Make sure you select a ribbon type that matches the media
you are using and configure the printer for thermal transfer paper.
The printer supports thermal transfer ribbon rolls with the ink-coated
side facing either inward or outward. To determine which type of
ribbon you have, use a pen or other sharp object to scratch through
the ribbon against a piece of paper. If you see a mark on the paper,
your ribbon is wound ink out.
To Next Page
Loading...
