Intermec PD41

Appendix A — Specifications
PD41 and PD42 Commercial Printer User’s Manual 103
Tickets With Gaps (Gap Stock)
* The print length is limited by memory constraints
LSS Detection Position (c)
Variable from 0 to 57 mm (0 to 2.24 in).
Detection Slit Length (d)
The length of the detection slit (excluding corner radii) must be a
minimum of 2.5 mm (0.10 in) on either side of the LSS detection
position (c).
Media Width (a)
Measurement Value
Maximum 114.3 mm (4.50 in)
Minimum 25.0 mm (1.00 in)
Copy Length (b)
Measurement Fingerprint IPL ESim
8 dots/mm (203 dpi)
Maximum 1270 mm (50 in)* 600 mm (23 in) 600 mm (23 in)
Minimum 6.0 mm (0.2 in) 6.0 mm (0.2 in) 6.0 mm (0.2 in)
11.81 dots/mm (300 dpi)
Maximum 558.8 mm (22 in)* 406.4 mm (16 in) 406.4 mm (16 in)
Minimum 6.0 mm (0.2 in) 6.0 mm (0.2 in) 6.0 mm (0.2 in)
Detection Slit Height (e)
Measurement Value
Maximum 26.0 mm (1.02 in)
Recommended 3.0 mm (0.12 in)
Minimum 1.2 mm (0.05 in)