Intermec PD41

Appendix B — Default Settings
114 PD41 and PD42 Commercial Printer User’s Manual
Emulation Parameters
Parameter Default Value
Mode Disabled
Adjust
Base (mmX10)
Stop (mmX10)
+88
+55
Feedadjust Parameters
Parameter Default Value
Startadjust 0
Stopadjust 0
Media Parameters
Parameter Default Value
Xstart 0
Width 832 dots (203 dpi)
Length 1200 dots (203 dpi)
Media type Label (with gaps)
Paper type Thermal transfer
Contrastt +0%
Testfeed <no value>
Testfeed mode Fast
Len (slow mode) 0
Print Defs Parameters
Parameter Default Value
Testprint N/A
Print speed 100 mm/sec
LSS test LSS Auto
Clip default Off
Cmd language N/A