Intermec PW50

Chapter 3 — Troubleshooting and Maintaining the PW50
PW50 Workboard Printer User Guide 33
Cleaning the PW50 Printer
Printer Part Cleaning Method Cleaning Interval
Platen roller Rotate the platen roller and clean it
thoroughly using a cleaning swab
(P/N AE26034).
After every five rolls of
media, or more often if
necessary.
Paper sensor Remove buildup and clean
thoroughly using a cleaning swab.
After every five rolls of
media, or more often if
necessary.
Tear bar Clean thoroughly using a cleaning
swab.
As needed.
Printhead Use the cleaning pen (P/N 757150)
or a cleaning swab (P/N AE26034)
to remove buildup.
After every five rolls of
media, or more often if
necessary.
Exterior Clean with a soft, water-dampened
cloth. Abrasive chemicals or
materials may damage the exterior.
As needed.
Interior Brush or air blow. Make sure the
paper sensor is free of dust.
After every five rolls of
media, or more often if
necessary.