Chapter 2 — Connecting the SR61B
22 SR61B Cordless Scanner User’s Guide
3 Double-click the Bluetooth icon on your taskbar. The Bluetooth
Devices listing all paired devices window appears.
4 Click on the command for adding a Bluetooth device (Add or Add
a device depending on operating systems). The wizard for adding
Bluetooth devices appears.
5 Follow the onscreen instructions until your host searches for
Bluetooth devices. The SR61B scanner appears in the Bluetooth
device list as a keyboard in the following format: SR61B - BDA,
where BDA is the scanner’s Bluetooth Device Address.
You can find the BDA on the scanner’s label.
6 Select your scanner and validate.
7 If a PIN is required (depending on your host operating system and
Bluetooth version), enter the default Bluetooth PIN (0000) and
validate.
Your scanner automatically connects to the host: it emits a series
of beeps from low to high, and the blue Intermec Ready-to-Work
indicator turns solid blue.
Note: If the scanner does not appear in the list, it might be already
paired with the host. Under some operating systems, already
paired Bluetooth devices do not appear in the Bluetooth device
search list.
Note: A pairing confirmation can be enabled. If so, the blue Intermec
Ready-to-Work indicator starts blinking rapidly at this stage,
indicating that the scanner is awaiting acknowledgement. Pull the
trigger to complete the pairing procedure.
To Next Page
Loading...
Need help?
General
