Intermec SR61B User Manual

Chapter 3 — Configuring the SR61B
28 SR61B Cordless Scanner User’s Guide
Basic Setup with Configuration Bar Codes
This section provides you with configuration bar codes for a basic
setup of your scanner. It also gives the procedure for configuring your
scanner offline or online using EasySet.
All default values are marked with (*).
Resetting Your Scanner
To reset your scanner, read the reset factory defaults configuration
bar code.
Reset factory defaults
Setting an International Keyboard
By default the SR61B uses a North American keyboard layout. Use
these configuration bar codes to select the keyboard for your country.
Additional keyboards are available in EasySet (see “Configuring
Your System with EasySet” on page 31).
North American Windows (*)
French Windows
French Canadian Windows 95/98

Intermec SR61B Specifications

General

Motherboard chipset	-
Dimensions (WxDxH)	69.9 x 114.3 x 177.8 mm
Compatible operating systems	Windows XP, Vista, 7
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C