Chapter 3 — Configuring the SR61B
SR61B Cordless Scanner User’s Guide 31
Configuring Your Scanner with EasySet
EasySet is an Intermec configuration application that provides you
with two ways to configure your scanner.
• Online setup—send configuration commands from EasySet
directly to the product.
• Offline setup—send configuration commands to a bar code setup
sheet, print the setup sheet and use a connected scanner to scan
the bar codes.
EasySet is available on the Intermec web site at www.intermec.com/
EasySet. Simply download and install.
Online Setup with EasySet
Online setup with EasySet is available for your scanner only if it is
connected to your host as an SPP Bluetooth device (outgoing
connection).
To configure your scanner online by sending commands from EasySet
1 Connect the scanner as an SPP Bluetooth device to a host PC (see
“SPP Bluetooth Device Connection” on page 23).
2 Start EasySet. The first time you start EasySet, the Select product
dialog box appears.
If the Select product dialog box does not appear, choose Product >
Select or click on the product icon in the upper left corner.
3 Select your product (SR61B).
4 Select Communication > Select communication interface. The
Device Selection dialog box appears.
5 Select the communication interface that you are using for your
scanner and click OK.
6 EasySet connects to your scanner and retrieves the current
configuration. These configurations are indicated with a blue
check mark or blue text. Open the folders to find the
configuration commands needed. Double click each command to
send it to the scanner.
To Next Page
Loading...
Need help?
General
