General information
This service manual contains all information necessary for maintenance and servicing of the “G40” wheelchair.
• Maintenance and servicing work is to be carried out in accordance with this service manual.
• Comply with all safety instructions
• Information on operation, general maintenance and servicing can be found in the operating manual of “G40”.
• Refer to the replacement parts catalog for information on ordering replacement parts.
• Maintenance and repair work on the “G40” may onla be performed by qualified personnel.
-Maintenance technicians should at least be trained in a relevant field, e.g. as a two-wheeled vehicle or
orthopaedics technician, or have an equivalent amount of professional experience.
-Personnel should also be familiar with electrical measurement equipment (multimeters).
• Should you encounter difficulties or have any questions, please contact INVACARE-SERVICE:
Switchboard: Tel. +049 (0)5731-754-0
Fax. +049 (0)5731-754-111
Service: Tel. +049 (0)5731-7545-(70-80)
Fax. +049 (0)5731-7542-(08-16)
Adress: Invacare Deutschland GmbH
Dehmer Str. 66
D-32549 Bad Oeynhausen
PO Box: Invacare Deutschland GmbH
Postfach 60 01 06
D-32 527 Bad Oeynhausen
• INVACARE can not be held liable for changes to the “G40” resulting from maintenance and servicing work
carried out incorrectly or not according to the relevant instructions.
Information concerning transportation
• If the wheelchair has to be sent away to the manufacturer for more serious repairs, always use the original
packaging for transportation.
• Please include a detailed account of the fault.
• We reserve the right to make changes in the interests of technical progress.
2
NOTE:
This symbol indicates general information concerning special features and helpful advice for installation.
ACAUTION:
Please pay special attention to this symbol. It indicates
>Safety instructions<.
You will notice the following symbols in this repair manual:
To Next Page
Loading...
