5
2.0 List of tools
A standard toolkit comprising the following minimum inventory is required:
Combination ring and open-end spanner SW 6, 7, 8, 10, 11, 12, 13, 17, 19
Allan key 2,5 mm, 3mm, 4mm, 5 mm, 6 mm, 8mm, 10mm
Torque wrench (commercially available)
Socket spanner set
Screwdrivers for slotted screws various
Crosstip screwdriver No.1, No.2
Side-cutting pliers
Flat pliers
Round pliers
Cable lug pliers
Wooden or plastic hammer
Tyre repair set (commercially available)
Air pressure gauge
Valve extraction tools
Special tool for removing wheel bearing
Multimeter with test points and various cable clips
Bridging cable
Soldering iron 30W
Assembly pliers for Starlock caps (commercially available)
Removing tools for font wheel hub (available by INVACARE-Service)
You will require the following for setting at the ACS control:
Programming unit Item no.
Software package, incl. interface cable and dongle Item no.
To Next Page
Loading...
