TYPICAL PRODUCT PARAMETERS
TDX™ Wheelchairs 22 Part No 1114809
TDX 3
ADULT -
ADJUSTABLE
WIDTH
JUNIOR -
ADJUSTABLE
WIDTH
SEAT WIDTH RANGE:
ADJUSTABLE SEAT BACK ANGLE (ASBA): 16 - 24 inches 12 - 16 inches
SEAT DEPTH RANGE (1-INCH INCREMENTS): 16 - 22 inches 12 - 18 inches
BACK HEIGHT RANGE: 12 - 24 inches 12 - 22 inches
BACK ANGLE RANGE: 85° to 105° in 5°
increments
80° to 100° in 5°
increments
SEAT-TO-FLOOR
LOW:
MEDIUM:
TALL:
17 inches @ 5°
19 inches @ 5°
21 inches @ 5°
OVERALL WIDTH OF BASE: 25 inches without joystick
OVERALL HEIGHT
LOW:
MEDIUM:
TALL:
with ASBA seat, 0° seat angle
33.25 inches
35.25 inches
37.25 inches
OVERALL LENGTH
WITH CENTER MOUNT FRONT RIGGING:
WITHOUT FRONT RIGGINGS:
42.9 inches @ 0°
35.25 inches
WEIGHT
WITHOUT 22NF BATTERIES:
WITH TWO 22NF BATTERIES:
166 lbs
260 lbs
MOTOR: 4 Pole, HD 4 Pole or True Track HD
DRIVE AXLE: Non-adjustable
DRIVE WHEELS/TIRES: 12.5 x 2.25-inch Foam Filled or Pneumatic (Standard)
CASTERS: 6 x 2-inch, Semi-pneumatic with Precision Sealed
Bearings
CASTER FORKS: Two side fork (Standard), One sided fork (Optional)
ARMRESTS: Flip Back, Fixed or Adjustable Height (Desk and Full
Length)
BATTERY REQUIREMENTS: Use MK p/n M22NFSLDG batteries only (Standard).
WHEELCHAIR UPHOLSTERY OPTIONS: Nylon
STANDARD ELECTRONICS: MK5™NX™-80 with MK5 SPJ™-80 Joystick
FRONT RIGGINGS: Center Mount, Swingaway, Manually Elevating, Power
Elevating
FOOTRESTS: Telescoping Front Rigging Supports,
2-inch and 4-inch long Pivot Slide Tube
SEAT TILT ANGLE ADJUSTMENT: Adjustable (0° to 10°)
SEAT CUSHION: Cushion (Optional)
WEIGHT LIMITATION
4 POLE
4 POLE HD OR TRUE TRACK HD:
Up to 300 lbs
Up to 400 lbs
Up to 150 lbs
Up to 150 lbs
NOTE: All dimensions are ± .50 inches unless otherwise indicated.
To Next Page