Invacare TDX 4 - Wheelchairs with 2 G Tarsys Seating Systems

SECTION 8—SEAT
Part No 1114809 95 TDX™ Wheelchairs
FIGURE 8.1 Replacing Seat Positioning Strap - Wheelchairs without 2G Tarsys Seating
Systems or TRRO Option
Wheelchairs with 2G Tarsys Seating Systems
NOTE: For this procedure, refer to
FIGURE 8.2.
1. Remove the two hex bolts, washers and
locknuts that secure the two halves of
the seat positioning strap to the seat
frame.
2. Remove the existing seat positioning
strap from the seat frame.
3. Position the new seat positioning strap
on the seat frame as shown.
4. Reinstall the hex bolt, washer and
locknut as shown. Tighten securely.
FIGURE 8.2 Replacing Seat Positioning
Strap - Wheelchairs with 2G Tarsys Seating
Systems
Seat Positioning Strap
Halves
Mounting Screw
Mounting Screw
Quick-Release Pin Tab
Quick-Release
Pin Tab
Locknuts
Washers
Mounting
Holes
Seat Frame
Seat Frame
NOTE: Formula
TRE seat shown.
Seat positioning
strap mounts the
same way on
ASBA seat.
Seat
Positioning
Strap
Strap Mounts
Here
Locknut
Spacer
Hex
Bolt