Iomega ScreenPlay - Supported Computer Interfaces; Network Client Requirements; Format Requirements

| top of page |
Supported Computer Interfaces
In addition to the AV connections listed above, the ScreenPlay TV Link DX supports the following
computer interfaces:
z 10/100 Ethernet for wired network connection
z Wireless Ready support for Iomega 802.11n WiFi adapters
z USB 2.0 for external USB devices
NOTE: Use of a network router or hub is recommended for network connection. The package does
not include a network router or hub.
| top of page |
Network Client Requirements
When the ScreenPlay TV Link is connected to a network, client computers on the network must
use one of the following operating systems:
z Microsoft
®
Windows
®
XP / Windows Vista
™
/ Windows 7 (all versions)
z Mac OS X, version 10.4 - 10.6
| top of page |
Format Requirements
External USB devices connected to the ScreenPlay TV Link DX, such as flash drives or external
hard drives, can be formatted NTFS, FAT32, Mac OS Extended (HFS+), Mac OS Extended Journaled,
Ext2, or Ext3.
| top of page |
Seite
3
von
65
27.
06.
2011
file:///C:/975415%20tvlinkdx
-
html
-
en/tvlinkdx
-
html
-
en/consolidated/printall.html