IP Gear SmartCell 111L - 3.5 User Guidance

IP Gear SmartCell 111L User Guide
(of the analog telephone) and make sure that you have a clear bi-directional
voice path.
• If there is no response from the Smartcell 111L, make sure that the number
that you are dialing is the correct number of the SIM card.
• To verify a SIM card number: remove the SIM card from the Smartcell
111L and insert it in a cellular phone. Dial out to another phone to verify
the number or use the number identification (CLIP) feature of the cellular
phone.
• If the number is correct and incoming-calls are still not received, contact
technical support.
Once you are satisfied that the unit is working properly, restore the connections
to the PABX.
You may now proceed to programming the unit, as explained later.
If the unit does not function properly - contact your technical support.
3.5
User Guidance
It is recommended to guide and inform the users about the best ways to utilize
the gateways:
• Do not wait more than 3 seconds between the digits of the dialed number.
• For PABX’s without LCR: Explain how to select the proper gateway,
what prefix to dial (for example: 81 for network A, 82 for network B).
• If Toll Restriction is active in PABX without LCR: some destinations will
not be reachable (the call will be too expensive). Use the proper prefix.
• If Call Duration Limit is active: Calls longer than the time limit will be
cut.
• Dialing the # sign at the end of the number will shorten the post dialing
delay.
Page 11