IP Gear SmartCell 111L User Guide
4.12 Erase SMS Inbox of the SIM card
4.12.1 Feature description
This feature is used in correlation to the option of sending SMS commands to
remotely control the unit. The inbox of the SIM is usually limited to a
maximum of 20 messages storage. When the inbox is full the unit will not be
able to receive any more SMS messages, thus disabling the option to remotely
control the unit via SMS commands. This feature will erase all messages stored
in the SMS inbox of the SIM.
4.12.2 Feature Programming
Dial **1343**# [hear a confirmation tone] to enter programming mode.
Dial *6150*# [hear a confirmation tone].
Note: The confirmation tone can be delayed up to 30 seconds, depending on
current inbox volume.
4.13 Network-Lock
4.13.1 Feature description
The Network-lock feature is designed to prevent the use of an unauthorized SIM
card in the Smartcell 111L. Once the Network-lock feature is enabled and an
unauthorized SIM card is used, the Smartcell 111L will not be able to handle any
incoming or outgoing calls. It will generate an error tone on outgoing calls and
will reject incoming calls.
4.13.2 Feature Programming
The Network-lock feature may be disabled or enabled when you get the unit. In
some cases you may be able to change it. If you want to change it - call your
technical support.
Page 20
To Next Page