IP Gear SmartCell 111L - 4.14 Restore Factory Default

IP Gear SmartCell 111L User Guide
4.16
Factory Default Values
• No toll restriction table (hence toll restriction is inactive)
• Network lock inactive or active (depends on the version)
• Rx gain – -8db, Tx gain – +36db
• CLIR enabled (the network defines whether to send or
block CLI)
• SIM PIN code request disabled. Default PIN code is 1234
• Immediate dialing length is 0 (disabled)
• Maximum call duration is not limited.
4.17 Call Progress tones
Type ON
cadence
OFF cadence Remarks
Dial tone Continuous
Busy tone 0.5 Sec 0.5 Sec
Error tone 0.2 Sec 0.2 Sec
Distinctive tone 0.2 Sec 0.1 Sec Incoming ring in off-
hook, before dialling
started
Confirmation tone
(for programming)
0.4 Sec 0.1 Sec 3 beeps
Rejection tone (for
programming)
0.4 Sec 0.1 Sec 2 beeps
Page 23