IP Gear SmartCell 111L User Guide
4.14 Restore Factory Default
4.14.1 Feature description
This feature is useful if you get a unit that was previously programmed with
unknown parameters and you want to bring it back to the same parameters it had
when it was shipped from the factory.
Note: the PIN code of the 111L will be restored to its default value. The PIN
code of the SIM card will not be changed. It is recommended to change the PIN
code of the SIM card to 1234 before this operation or else the 111L will start
with “wrong PIN code” status.
4.14.2 Feature Programming
Make sure you know the PIN Code of the SIM and the unit.
Dial **1343**# [hear a confirmation tone] to enter to programming mode.
Dial *5470*# [hear a confirmation tone]
Power down the unit and reconnect it to the power supply. The unit is now ready
to be reprogrammed from fresh, same as it was when shipped from factory.
Page 21
To Next Page
Loading...