IP Gear SmartCell 111L - 4.5 Calling Number Identification Restriction (CLIR); 4.6 PIN Code Programming

IP Gear SmartCell 111L User Guide
4.5 Calling Number Identification Restriction (CLIR)
4.5.1 Feature description
You can enable or disable the unit from sending its SIM number to the called
party. This is usually done to keep your number undisclosed to others,
particularly if you want to discourage incoming calls to the 111L unit.
4.5.2 Feature Programming
Dial **1343**# [hear a confirmation tone] to enter programming mode.
Dial *8200*# [hear a confirmation tone] to allow the presentation of the unit
number in the called phones.
Dial *8201*# [hear a confirmation tone] to disable the presentation of the unit
number in the called phones.
4.6 PIN Code Programming
4.6.1 Feature description
Some countries require that every SIM card will have a PIN code in order to
protect against unauthorized use. A protected SIM card will not be usable
without the PIN code. If you want to use a PIN-code protected SIM-card, you
have to activate it and insert it into the 111L. Every time the unit powers up, it
will deliver the stored PIN code to the SIM card. If the code matches – the 111L
will work normally. If the code is wrong the 111L will lock itself: the unit will
not function and the STATUS LED will blink. (This is done in order to prevent
the SIM card from locking after 3 trials with wrong codes. Once the SIM card is
locked, you can only unlock it with the PUK number). To clear the 111L from
lock after a wrong PIN - you have to dial the special code for it.
The 111L PIN code protection can be used in several ways:
• With no PIN Code protection. Every SIM, programmed to function without
PIN code, can be used.
• With the default PIN code of 1234. The Smartcell 111L is preprogrammed
with this code. You have to use a SIM card, programmed to require the code
1234.
• With a different PIN code. You must have a SIM card with a known PIN code
and to enter the code into the 111L.
If the STATUS LED is fast blinking, there is an error with the PIN code entry.
To resolve this, program the SIM card not to require the PIN code or change its
code to the same code of the 111L. (To program the SIM card put it in a regular
Page 15