iPECS GDC-800H - Reset settings; Auto answer

GDC-800H IP DECT Handset User Guide - Issue 2.0 19
unlocked. The key lock is configurable under the Security menu where the Automatic key lock
time is selected. You choose the key lock timer value, which can be set to OFF or times up to 5
minutes. If you do not press any key, when the timer expires, the handset keys will “lock”. In
addition, you can manually lock the handset. The asterisk (‘*’) button on the dial pad is used to
lock and unlock the handset.
Handset name
You can assign a Name, which is displayed while the handset is idle. An editor is provided on
screen and, using the dial pad keys, the name is entered. The name can be up to 20 characters.
Reset settings
You can return the handset settings to the default values using the Reset settings item. This will
not change the registration status of the handset.
Status
The “Status” menu delivers status information on the handset and the active base station. The
information includes:
Base station status
 Software version
 Hardware version
 IP address
 MAC address
 System name
Handset status
 Software version
 Hardware version
 DECT band
 Battery level
 IPEI
Auto answer
Normally, a call is answered using the Off-hook (green handset) key. If desired, you can
configure the phone to answer a call when any dial pad key as well as the Off-hook key or the
handset may answer the call automatically. Options for Auto answer are: