GDC-800H IP DECT Handset User Guide - Issue 2.0 21
Ringer volume
The default ringer volume can be adjusted to one of seven levels. As you move up and down
with the navigation buttons, the ring melody is played at the selected level. Note while receiving
an incoming call you can raise or lower the ring volume.
Ringer melody
One of several melodies can be assigned as the normal ring tone. Other than calls from a
contact assigned a different ring tone, you will be alerted to incoming calls with the assigned
melody. You can play the selected melody with the “Play” soft key. Note the “Stop” soft key
stops the playback.
Alert volume
The handset has an alarm clock, which is set under the “Alarms” menu. If the alarm clock is set,
the handset will alert you at the alarm time using the Alert tone at the “Alert volume”. When
accessing the menu, the current level is indicated graphically in the LCD and is adjusted with
the Navigation Up/Right and Down/Left keys.
Alert tone
The handset has an alarm clock, which is set under the “Alarms” menu. If the alarm clock is set,
the handset will alert you at the alarm time using the assigned “Alert tone”. You select a tone
from the list shown in this menu. You can play the selected melody with the “Play” soft key.
Note the “Stop” soft key stops the playback.
Vibrator
The GDC-800H incorporates a small vibrator that can be configured to alert you in place of or in
addition to the audible ring signal. The settings for vibration alert are
Off
Vibrate then ring
Vibrate only
Vibrate and ring
Key sound
When you press a key on the handset, the handset will generate an audible signal as a
confirmation. The signal can be set as a Click, Tone or can be disabled (silent).
To Next Page
Loading...
