iPECS-MG Quick Start Guide
40
5.2.2.6 System Time and Date Setting (PGM233)
At Admin programming mode:
1. Press the [TRANS/PGM] button + 233.
2. Press the FLEX 1 Button (Time).
3. Enter 2 digits for hour and 2 digits for minutes (HHMM as 24 Hour format. For example, 1530 for 3:30 PM).
4. Press the [HOLD/SAVE] button.
OR
5. Press the FLEX 2 Button (Date).
6. Enter 2 digits for month, 2 digits for day and 2 digits for year (MMDDYY, 041809 for 2009 April, 18).
7. Press the [HOLD/SAVE] button.
To Next Page
Loading...
