147YLS-K
Message
Guide laser ON
Type
Status
Description
This status message is active when the guide laser of the laser is
switched on.
If a beam switch is installed, an optical path must be selected in order to
be able to see the guide laser after the process optics.
Message
Chiller ready
Type
Status
Description
This status message indicates that all chiller parameters lie within the
specified range.
If you switch the laser on again after a prolonged pause, it may take sev-
eral minutes until the specified temperatures have been reached and
the chiller outputs the status message Chiller ready.
Message
Laser "Standby"
Type
Status
Description
This status message is active, if
• there is no failure pending
• the laser power supply is switched off.
| Appendix
To Next Page
Loading...
