iRobot Roomba Red - Test Virtual Wall (if applicable); Test Remote (if applicable); Replace Faulty Accessories; Pack & Record the Serial Numbers

11
Record the ‘Power Supply Code’ Appendix C
13: Test Virtual Wall (if applicable)
Test returned Virtual Wall with charged batteries
o Clean Virtual Wall (IR emitter)
o Check power light (if blinking then batteries are low)
o Check Virtual mobility (Fig 4 in Appendix H)
Troubleshoot
Virtual Wall
(pg 43)
Record the ‘Virtual Wall Code’ Appendix C
14: Test Remote (if applicable)
Test returned Remote with charged batteries
o Clean Remote (IR emitter)
o Check power light (if blinking then batteries are low)
o Verify all command buttons function with a Roomba
Troubleshoot
Remote (pg
44)
Record the ‘Remote Code’ Appendix C
15: Replace Faulty Accessories
Replace faulty accessories
Record the ‘Action Item Code’. Appendix C
16: Pack & Record the Serial Numbers
Wrap Battery so no electrical contact is made with the Roomba in
order to avoid creating a deeply discharged battery.
Record the serial number of all replacement parts. Appendix B