Irritrol KD2 User Manual

18
Display Language Option
Various display information can be viewed in any of the
three languages: English, Spanish and French.
To change the display language, use the following
procedure:
1. Turn the control dial to the Special Functions
position.
2. Press the button as needed to display ENG.
3. Press the or button to select the desired
language: ESP (Spanish) or FRA (French).
4. Turn the control dial to the HOME position when
nished.
Time Format Option
Time of day can be displayed in either 12hour AM/PM or
24hour format.
1. Turn the control dial to the Special Functions
position.
2. Press the button as needed to select the clock time
format option designated by 12H or 24H.
3. Press the or button to display the desired
format.
4. Return the control dial to HOME position when
nished.
Program Erase
The Program Erase feature enables you to easily clear the
controller memory of all program start times, station run
time duration and water budget information for a selected
program or all programs without changing the current time,
date and language option.
1. Turn the control dial to the Special Functions
position.
2. Press the button as needed to display CLR.
3. Program A will be displayed. If needed, press the
button once to select program B. Press the button
again to select program C. Pressing the button again
selects programs A, B and C.
4. Press the buton to display the program letter(s) and
OK?. Press the button to cancel.
5. Press the button to clear the program(s) (CLR will
be displayed).
6. Repeat steps 3–5 to clear any remaining program(s) as
needed.
7. Return the control dial to HOME position when
nished.

Irritrol KD2 Specifications

General

Brand	Irritrol
Model	KD2
Category	Controller
Language	English