ISHIDA IPC 3kg - Key Functions (When Setting Value); Starting Test Mode; Ending Test Mode; Memory Switch

Manual No. 0183B 8/29 IPC Series Service Manual
2.1.2 Key Functions (when setting value)
Key Function
ON
OFF
- Use at TEST mode startup.
(Press this key while the TARE key is depressed.)
- Use at TEST mode end
ZERO
- Use when selecting digits.
TARE
- Press when fixing values after mode or data selection.
- Increments values for each press during data change.
Â
- Press when entering C3 or F mode
(Tactile switch in the main circuit board)
Stores E2ROM data set for each item of the C and F mode.
Memory
Switch
2.1.3 Starting Test Mode
Operation Display
1. Press and release the ON/OFF key while the TARE
key is depressed.
2. Release the TARE key.
2.1.4 Ending Test Mode
Operation Display
1. C mode / F mode status
2. Release the ON/OFF key after depressing for one
second or more.
2.1.5 Memory Switch
Operation Display
1. C mode / F mode status
2. Press the Memory Switch.