Inspection and Installation
You can select different interfaces by clicking the seven buttons shown in the
navigation bar on the left side of the window. The detailed descriptions are as
follows.
• Home: Web home interface, displays the model and appearance of the
instrument;
• Information: displays the serial number of the instrument and more system
information as well as LAN configuration parameters;
• Web Control: enables the Web control to begin controlling the instrument.
This page allows you to monitor and control the instrument;
• LAN Configuration: reconfigure the LAN parameters;
• Security: change the password and control access to the Web interface;
• Manual: go to the ITECH official website and view or download the relevant
documents;
• Logout: logout the Web interface.
2.7.2.2 Using Sockets
The instruments allow up to six simultaneous socket connec-
tions to be made.
ITECH instruments have SCPI socket services, which can be used to send and
receive SCPI commands, queries, and query responses. All commands must
be terminated with a newline for the message to be parsed. All query responses
will also be terminated with a newline.
Copyright © Itech Electronic Co., Ltd.
31
To Next Page
Loading...
Need help?
General
