ITech IT-M3900C Series - Page 186

Technical Specification
Parameter IT-M3903C-10-340
Read Back
Resolution
Voltage
0.001V
Current 0.01A
Power 1W
Setup Accuracy
Voltage
≤0.03% + 0.03%FS
Current ≤0.1% + 0.1%FS
Power ≤0.5% + 0.5%FS
Resistance in series （CV
priority）
≤1%FS
Load resistance （CC
priority）
Lower limit: 1/(1/Rset+(1/Rset)*0.2+0.008)
Upper limit: 1/(1/Rset-(1/Rset)*0.2-0.008)
Read Back Accuracy
Voltage
≤0.03% + 0.03%FS
Current ≤0.1% + 0.1%FS
Power ≤0.5% + 0.5%FS
Ripple（20hz-
20Mhz）
Vp-p ≤65mVpp
Ripple（20hz-
300Khz）
Vrms ≤10mV
Irms ≤100mA
Setup Temperature
Coefficient
Voltage ≤50ppm/℃
Current
≤50ppm/℃
Read Back Temper-
ature Coefficient
Voltage ≤50ppm/℃
Current
≤50ppm/℃
Rise Time( no load ) Voltage
≤50ms
Rise Time( full load ) Voltage
≤100ms
Fall Time( no load ) Voltage
≤50ms
Fall Time( full load ) Voltage
≤100ms
Transient Response
Time
Voltage
≤10ms
Line Regulation
Voltage
≤0.05% + 0.05%FS
Current ≤0.05% + 0.05%FS
Load Regulation
Voltage
≤0.002%*I + 0.05%FS
Current ≤0.05% + 0.05%FS
Output protection
OCP -245A or 345A
OVP 10.5V
Overpower protection
-2448W or 3468W
Copyright © Itech Electronic Co., Ltd.
175