ITech IT-M3900C Series - Page 194

Technical Specification
Parameter IT-M3906C-80-120
Vrms ≤80mV
Setup Temperature
Coefficient
Voltage ≤50ppm/℃
Current
≤50ppm/℃
Read Back Temper-
ature Coefficient
Voltage ≤50ppm/℃
Current
≤50ppm/℃
Rise Time( no load
)
Voltage
≤15ms
Rise Time( full load
)
Voltage
≤30ms
Fall Time( no load ) Voltage
≤30ms
Fall Time( full load ) Voltage
≤15ms
Transient Response
Time
change from 20% to
90% of rated
current
Voltage
≤1ms
Line Regulation
Voltage
≤0.01% + 0.01%FS
Current ≤0.05% + 0.05%FS
Load Regulation
Voltage
≤0.01% + 0.01%FS
Current ≤0.05% + 0.05%FS
Output protection
OCP -125A or 125A
OVP 82V
Overpower
protection
-6120W or 6120W
Remote Sense
Compensation
Voltage
≤2V
External analog
（optional）
current program
External programming voltage -10V to 10V corre-
sponds to current -120A to 120A
current monitor
Current -120A to 120A corresponds to external
monitoring voltage -10V to 10V
voltage program
External programming voltage 0 to 80V Corre-
sponding voltage 0 to 10V
voltage monitor
Voltage 0 to 80V corresponds to external monitor-
ing voltage 0 to 10V
Other parameters:
Copyright © Itech Electronic Co., Ltd.
183