ITech IT-M3900C Series - Page 24

Quick Reference
External
External trigger
DLogTrig Source Set the trigger method for the data logging.
Immediate
Trigger immediately
Manual
Manual trigger
Bus
Bus trigger
Voltage Voltage trigger
Current
Current trigger
External
External trigger
I/O Set the communication information between instrument and PC.
USB USB communication interface
TMC
USB-TMC protocol
VCP
Virtual serial port
Display as the following format:
baud rate_data bit_parity bit_stop bit.
• Baud rate: 9600
• Data bit: 8
• Parity bit: N
• Stop bit: 1
LAN
Virtual LAN communication. After selecting
this option, you also need to set the commu-
nication parameters of the LAN, and the
menu items are the same as those in the
LAN menu (see below).
LAN LAN communication interface
Info View the LAN information.
LAN Status: Down
IP Mode: Auto
IP: 0.0.0.0
Mask: 0.0.0.0
Gateway: 0.0.0.0
DNS1: 0.0.0.0
DNS2: 0.0.0.0
MAC: 8C:C8:F4:40:01:E1
MDNS Status:
HostName:
HostDesc:
Domain:
TCPIP:INSTR
Socket Port: 30000
IP-Conf
Configure LAN IP information.
IP-Mode
Configure LAN IP mode.
Copyright © Itech Electronic Co., Ltd.
13